Card Making Supplies : DIY Wedding Invitations

MENU

1 - Cut A4 piece of Precious Pink card to 28cm wide. Fold in half (for best results score the card first). You should end up with a folded card measuring 14cm wide x 21cm high.

2 - cut a piece of Luxury lustre empress silver paper to 20cm x 13.5cm. Glue to front of card with double sided tape or spray mount

3 - Cut a piece of precious pink card to 11.5cm wide x 18cm high. Glue on to card.

4 - Print menu wording on to pearlised white card. Cut down to 11cm wide x 17.5cm high. Remember to leave a gap for the ribbon.

5 - Place a line of double sided tape across the front of the card where you would like the ribbon to be placed. Stick the ribbon down and secure at the back of the card using a hot melt glue gun.

6 - Glue the large manhattan embellishment on top of the ribbon using a hot melt glue gun.

7 - Print menu wording on to A4 paper. Cut down to 20cm x 27cm. Fold in half and secure to inside of menu using double sided tape

Other things you may require to complete this design:

Also white ribbon (2.5cm wide).

WRAP IT SPECIAL

1 - Wrap your present tightly in Luxury Lustre Empress Blush paper.

2 - Starting at the bottom of the gift, wrap your ribbon around, cross at the top and wrap back around in the opposite direction, ending up at the bottom. Secure each end of the ribbon with a hot melt glue gun and cut off the loose ends.

3 - Glue a manhattan medium embellishment to the centre of the ribbon at the top of your gift.

Other things you may require to complete this design:

Also white ribbon (2.5cm wide).
and a very special present!!!!

INVITATION

1 - Cut a piece of pearlised white card to 18cm x 13cm

2 - Cut a second piece of pearlised white cards to 17cm x 12cm and glue on top using double sided tape or craft mount.

3 - Print your chosen wording on to a piece of card. Cut down to 16.5cm x 11.5cm.

4 - Cut a section of white ribbon appx. 13cm. Run a line of double sided tape down the front of the card and press the ribbon on top. Secure both ends of the ribbon to the back of the card using a hot melt glue gun.

5 - Glue panel in to place using double sided tape or craft mount.

6 - Glue large Manhattan embellishment to the centre of the ribbon using a hot melt glue gun.

Also white ribbon (2.5cm wide).

Glitzy Placecard

1 - Cut section of card 14cm x 10cm. Fold in half (you will get a much better finish if you score the card first)

2 - Cut a section of Luxury Lustre Empress Silver paper 9.5cm x 6cm and glue to front of placecard using double sided tape or craft mount.

3 - Cut a section of silver card 7cm x 4cm. Glue on top.

4 - Cut a section of pearlised white card to 6.5cm x 3.5cm.

5 - cut a section of ribbon 8cm long. Secure both ends of the ribbon to the back of the white card using a hot melt glue gun. Glue panel in to place.

6 - Glue small manhattan embellishment on top of ribbon using a hot melt glue gun.

Other things you may require to complete this design:

Also
white ribbon 1cm wide

Bling Card

1 - Cut a piece of precious pink card to 14.5cm high x 21cm high. Fold in half (for best results score the card first).

3 - Cut a piece of precious pink card to 8.5cm side x 6.5cm high. Glue in to place using double sided tape or craft mount.

2 - Cut a second piece of precious pink card to 8cm x 6cm and glue in to place.

3 - Cut a third piece of precious pink card to 8cm x 2cm and glue in to place on the front of the top panel.

4 - Glue a medium manhattan embellishment to the top of the last layer using a hot melt glue gun.

Other things you may require to complete this design: